Guides and Measuring - Wolfcraft South Africa https://wolfcraftsa.co.za/product-category/guides-measuring/ German Tooling Systems Thu, 20 Jun 2024 14:52:37 +0000 en-ZA hourly 1 https://wordpress.org/?v=6.8.1 https://wolfcraftsa.co.za/wp-content/uploads/2021/02/cropped-WolfcraftSA-Favicon-32x32.png Guides and Measuring - Wolfcraft South Africa https://wolfcraftsa.co.za/product-category/guides-measuring/ 32 32 184349588 Angular Bevel Gauge for Mitre Saws https://wolfcraftsa.co.za/product/angular-bevel-gauge-for-mitre-saws/?utm_source=rss&utm_medium=rss&utm_campaign=angular-bevel-gauge-for-mitre-saws Thu, 20 Jun 2024 13:07:14 +0000 https://wolfcraftsa.co.za/?post_type=product&p=1788

For measuring and transferring angles

  • for measuring and transferring wall angles from 30 to 180° and subsequent alignment of the angle at the mitre saw
  • automatic angle bisector for the correct mitre cut makes your work easier and reduces errors
  • incl. telescopic corner callipers for outside corners and foldable stop for easy marking at the workpiece

The post Angular Bevel Gauge for Mitre Saws appeared first on Wolfcraft South Africa.

]]> The angular bevel gauge for mitre saws enables precise, convenient measurement of angles with subsequent transfer to the mitre saw. The first step is to push the two plastic legs into the corner of the wall and align them along the walls. Fasten them in position using the eccentric lever. The lever is designed for easy operation, even in tight working areas. In the next step, place the angular bevel gauge with the two integrated magnets at the saw blade and accurately align the angles at the adjustable stops of the saw. When cutting, the automatic angle bisector ensures the correct mitre cut; this makes your work easier and practically eliminates the risk of errors. You can also use the telescopic corner callipers to easily measure outside corners. In addition, the limit stop can be folded out, making it easy to mark angles directly on the workpiece.

Properties
2 plastic legs for measuring wall angles from 30 to 180°
eccentric lever for convenient fastening at the measured angle, even in constricted workspaces
telescopic corner callipers makes it possible to measuring outside corners
2 magnets for easy attachment to saw blade, for aligning the angle at the mitre saw
automatic angle bisector for the correct mitre cut makes your work easier and reduces errors
easy marking of angles at the workpiece, thanks to the integrated foldable stop

Technical data
Angle min – max 30 – 180°

The post Angular Bevel Gauge for Mitre Saws appeared first on Wolfcraft South Africa.

]]> 1788 Bevel and Mitre Box 100 mm https://wolfcraftsa.co.za/product/bevel-and-mitre-box-100-mm/?utm_source=rss&utm_medium=rss&utm_campaign=bevel-and-mitre-box-100-mm Thu, 20 Jun 2024 12:54:39 +0000 https://wolfcraftsa.co.za/?post_type=product&p=1784

2-in-1 product for precise baseboards

  • for measuring angles and subsequently sawing precise mitres, e.g. for baseboards up to 100 mm
  • for tracing 85°-180° angles and automatically transferring the mitre angle without errors to the saw
  • integrated guide pins for the handsaw enable the precise sawing of baseboards

The post Bevel and Mitre Box 100 mm appeared first on Wolfcraft South Africa.

]]> The bevel gauge and mitre box for measuring and sawing precise mitres is a clever 2-in-1 product that guarantees you perfectly fitted baseboards up to a height of 100 mm, eliminating the need for an angular bevel gauge. You will also save yourself the tedious and error-prone task of transferring the correct angle to the saw. Measure corners from 85-180° conveniently using the two moving arms. In the second step, place the baseboard in the guides provided and saw using the backsaw. The automatic angle bisector using 2 guide pins ensures precise mitres. Using the bevel and mitre box, you will be able to achieve perfect baseboard transitions even in the most skewed of corners that old buildings have to offer.

Properties
2-in-1 product for measuring angles and subsequently sawing precise mitres, e.g. for baseboards up to a height of 100 mm
2 moving arms for measuring angles of 85-180°
integrated guide pins for the handsaw enable the precise and error-free sawing of mitres
sturdy and durable thanks to high-quality design
for baseboards up to a width of 30 mm
high quality “Made in Europe”

Technical data
Working height 100 mm
Angle min – max 85 – 180°
Product dimensions (W x D x H) 100 x 353 x 140 mm
Product weight 0.66 kg

The post Bevel and Mitre Box 100 mm appeared first on Wolfcraft South Africa.

]]> 1784 Angular Bevel Gauge https://wolfcraftsa.co.za/product/angular-bevel-gauge/?utm_source=rss&utm_medium=rss&utm_campaign=angular-bevel-gauge Thu, 20 Jun 2024 12:09:45 +0000 https://wolfcraftsa.co.za/?post_type=product&p=1767

For automatic angle bisector

  • to measure the wall angle and automatically display the correct cutting angle
  • integrated angle stop to mark angles easily
  • magnet to attach it securely onto the saw

The post Angular Bevel Gauge appeared first on Wolfcraft South Africa.

]]> With the angular bevel gauge, you can record the wall angle of a room precisely and easily. You will also benefit from the automatic display of the cutting angle, with which you can now set all mitre-box saws without any errors. In addition to the integrated angle stop, the angular bevel gauge also has a scale and an integrated magnet, enabling you to adjust it easily and securely on the saw. In this way you can create accurate angle cuts from 30 – 180° with ease. The angular bevel gauge is made from robust, high-quality plastic and is a durable companion for numerous installation tasks.

Properties
automatic display of the cutting angle makes the work easier and reduces errors
simple display of angles thanks to the integrated stop
magnet for simple adjustment on the saw

Technical data
Angle min – max 30 – 180°
Material Plastic

The post Angular Bevel Gauge appeared first on Wolfcraft South Africa.

]]> 1767 Angular Bevel Gauge with Marking Gauge Function https://wolfcraftsa.co.za/product/angular-bevel-gauge-with-marking-gauge-function/?utm_source=rss&utm_medium=rss&utm_campaign=angular-bevel-gauge-with-marking-gauge-function https://wolfcraftsa.co.za/product/angular-bevel-gauge-with-marking-gauge-function/#respond Thu, 29 Apr 2021 09:58:57 +0000 https://wolfcraftsa.co.za/?post_type=product&p=1532 Practical aid when laying floors and building furniture
  • for measuring and transferring angles and for use as a marking gauge
  • folding stop for positioning at workpiece makes it easy to mark angles or parallel lines
  • scale on the moving leg, for marking parallel lines

The post Angular Bevel Gauge with Marking Gauge Function appeared first on Wolfcraft South Africa.

]]>

Product description

The angular bevel gauge is a smart solution for convenient measurement of angles with subsequent transfer to the workpiece – ideal for laying floors or in furniture construction. The first step is to push the two plastic legs into the corner of the wall and align them along the walls. Use the locking lever to fasten them in position. The lever is designed for easy operation with only one hand from either side, even in tight working areas. The next step is to position the angular bevel gauge on your workpiece and mark the angle. The angular bevel gauge is also ideal for use as a scratch gauge (for marking parallel lines). This is made easy by the scale on the moving legs and the guide hole for the pencil. Simply position the stop, insert the pencil and pull the angular bevel gauge across the workpiece.

Properties
2 plastic legs for measuring and transferring angles
lever with one-hand operation from both sides, for convenient fastening at the measured angle, even in constricted workspaces
folding stop for positioning at workpiece makes it easy to mark angles or parallel lines
scale on the moving leg, for marking parallel lines
integrated hole in the moving leg, for guiding the pencil when using the marking gauge function

The post Angular Bevel Gauge with Marking Gauge Function appeared first on Wolfcraft South Africa.

]]> https://wolfcraftsa.co.za/product/angular-bevel-gauge-with-marking-gauge-function/feed/ 0 1532 Bevel and Mitre Box https://wolfcraftsa.co.za/product/bevel-and-mitre-box/?utm_source=rss&utm_medium=rss&utm_campaign=bevel-and-mitre-box https://wolfcraftsa.co.za/product/bevel-and-mitre-box/#respond Thu, 29 Apr 2021 09:20:54 +0000 https://wolfcraftsa.co.za/?post_type=product&p=1511 2-in-1 product for precise baseboards
  • for measuring angles and subsequently sawing precise mitres, e.g. for baseboards
  • for tracing 85° - 180° angles and automatically transferring the mitre angle without errors to the saw
  • integrated guide pins for the handsaw enable the precise sawing of baseboards

The post Bevel and Mitre Box appeared first on Wolfcraft South Africa.

]]>

Product description

The bevel gauge and mitre box for measuring and sawing precise mitres is a clever 2-in-1 product that guarantees you perfectly fitted baseboards, eliminating the need for an angular bevel gauge. You will also save yourself the tedious and error-prone task of transferring the correct angle to the saw. Measure corners from 85-180° conveniently using the two moving arms. In the second step, place the baseboard in the guides provided and saw using the backsaw. The automatic angle bisector using 2 guide pins ensures precise mitres. Using the bevel and mitre box, you will be able to achieve perfect baseboard transitions even in the most skewed of corners that old buildings have to offer.

Suitable for material
very suitable suitable for baseboards up to a width of 30 mm

Properties
2-in-1 product, replaces bevel and mitre box and makes possible measuring and cutting in one work step
2 moving arms for measuring angles of 85-180°
integrated guide pins for the handsaw enable the precise and error-free sawing of mitres
sturdy and durable thanks to high-quality design

Technical data
angle 85 – 180 °

The post Bevel and Mitre Box appeared first on Wolfcraft South Africa.

]]> https://wolfcraftsa.co.za/product/bevel-and-mitre-box/feed/ 0 1511 T-square with parallel cutter https://wolfcraftsa.co.za/product/t-square-with-parallel-cutter/?utm_source=rss&utm_medium=rss&utm_campaign=t-square-with-parallel-cutter https://wolfcraftsa.co.za/product/t-square-with-parallel-cutter/#respond Thu, 29 Apr 2021 07:58:30 +0000 https://wolfcraftsa.co.za/?post_type=product&p=1491
  • moving T-square with continuously adjustment angle stop
  • integrated scale for precise marking of angle cuts at exactly the right angle
  • additional parallel and strip cutter with trapezium blade enables a series of guided cuts

    • The post T-square with parallel cutter appeared first on Wolfcraft South Africa.

    ]]>

  • Product description
    The T-square and parallel cutter makes cutting gypsum plasterboard easy and precise. Clean results in just 3 steps: score along a guide edge, break, cut through the cardboard layer – done. The moving T-square with angle function and the easily legible scale guarantee precision guidance at exactly the right angle. As a result, precise cut edges are possible in series, which will make subsequent filling and sanding work much easier. The accompanying parallel and strip cutter is fitted with a high-performance trapezium blade. Simply push it onto the cutter carriage and lock it, and it will ensure guided cuts in series: extend the blade, guide over the entire board using the T-square, break the board and cut off with the cutter knife.

    Suitable for material
    very suitable Gypsum plasterboard

    Properties
    moving T-square with continuously adjustable angle stop for precise longitudinal and angle cuts of 0–180° in gypsum plasterboard
    integrated scale for precise marking of angle cuts at exactly the right angle enabling minimum subsequent filling work
    additional parallel and strip cutter with trapezium blade enables a series of guided cuts
    durable thanks to corrosion-resistant surface made of anodised aluminium

    Technical data
    cutting width max. 970 mm
    cutting length max. 1,000 mm
    angle 0 – 180 °

    Scope of delivery
    Inhalt 1 parallel and strip cutter
    1 trapezium blade 52/0.50 mm

    • The post T-square with parallel cutter appeared first on Wolfcraft South Africa.

    ]]>     https://wolfcraftsa.co.za/product/t-square-with-parallel-cutter/feed/ 0 1491     Contour Gauge https://wolfcraftsa.co.za/product/contour-gauge/?utm_source=rss&utm_medium=rss&utm_campaign=contour-gauge https://wolfcraftsa.co.za/product/contour-gauge/#respond Tue, 10 Nov 2020 08:25:01 +0000 https://wolfcraftsa.co.za/?post_type=product&p=819 For tracing and transferring cutting lines
    • profile gauge made from high-quality plastic for tracing profiles up to 130 mm wide and 30 mm deep
    • clamping lever to fix the pins securely
    • ideal for accurately fitting laminate, e.g. around heating pipes

    The post Contour Gauge appeared first on Wolfcraft South Africa.

    ]]>

    Product description

    The contour gauge is the perfect tool for tracing contours and cutting lines precisely and for transferring these to the workpiece. It is ideal, for example, when you have to cut laminate boards to fit around heating pipes or other obstacles. After unlocking the tracer pins, place the gauge on the ground and push it against the obstacle. The pins move and indicate the contour precisely. After fixing the shape with the clamping lever, this traced contour remains secured and you can easily transfer it in the next step. The contour gauge makes it possible for you to trace even complicated profiles precisely and transfer them to another part. Measurement errors and inaccuracies are a thing of the past.

    Properties
    versatile thanks to the 91 tracer pins, precisely tracing contours up to 130 mm wide and 30 mm deep
    clamping lever to securely fix the contour and for easy and precise transfer
    durable and robust thanks to the high-quality plastic design

    Technical data
    product width 105 mm
    product height 20 mm
    dimensions product (w x d x h) 180 x 105 x 20 mm
    working width 130 mm
    working length 30 mm

    The post Contour Gauge appeared first on Wolfcraft South Africa.

    ]]>     https://wolfcraftsa.co.za/product/contour-gauge/feed/ 0 819     Universal Angle & Try Square 500mm https://wolfcraftsa.co.za/product/universal-angle-try-square-500mm/?utm_source=rss&utm_medium=rss&utm_campaign=universal-angle-try-square-500mm https://wolfcraftsa.co.za/product/universal-angle-try-square-500mm/#respond Tue, 10 Nov 2020 07:58:18 +0000 https://wolfcraftsa.co.za/?post_type=product&p=777 For measuring, marking, drawing and guided cutting
    • flat square, angle measuring scale, parallel marker, marking stencil and drill guide for concealed hinges in one device
    • removable plastic limit stop for precise working on surfaces or edges
    • high-quality metal design with scale on both sides

    The post Universal Angle & Try Square 500mm appeared first on Wolfcraft South Africa.

    ]]>

    Product description

    The steel universal measuring aid and marking template brings a wide range of functions together in a single tool. The universal angle & try square lets you determine and transfer distances and angular measurements with ease. Being guided by the sturdy limit stop and hole line means you can effortlessly draw parallel lines with a pencil. You can quickly dismantle the limit stop on the angle rail so you can mark or measure surfaces precisely. For transferring curves and circles to workpieces, you simply use the universal angle as a compass. The two fixed radii on the angle measuring scale allow you to quickly transfer curves, e.g. for rounded corners on boards. The angle acts as a stable leading edge when using a jigsaw. It will quickly become indispensable when laying laminate or making furniture. Whether you need an integrated 45° limit stop, 32-hole line or drilling template for concealed hinges, with the universal angle & try square, you’ll be well-equipped to take on any project.

    Properties
    flat square, angle measuring scale, parallel marker, marking stencil and drill guide for concealed hinges in one device – saves money and space
    removable plastic limit stop for precise working on surfaces or edges
    scale on both sides for easy reading in every position
    sturdy and durable thanks to high-quality metal design

    Technical data
    back square 90 °
    material steel
    Scaling millimetre (mm)
    further product specification 32 mm grid for furniture-making

    The post Universal Angle & Try Square 500mm appeared first on Wolfcraft South Africa.

    ]]>     https://wolfcraftsa.co.za/product/universal-angle-try-square-500mm/feed/ 0 777     Universal Angle & Try Square 300mm https://wolfcraftsa.co.za/product/universal-angle-try-square-300mm/?utm_source=rss&utm_medium=rss&utm_campaign=universal-angle-try-square-300mm https://wolfcraftsa.co.za/product/universal-angle-try-square-300mm/#respond Tue, 10 Nov 2020 07:57:47 +0000 https://wolfcraftsa.co.za/?post_type=product&p=757 For measuring, marking, drawing and guided cutting
    • flat square, angle measuring scale, parallel marker, marking stencil and drill guide for concealed hinges in one device
    • removable plastic limit stop for precise working on surfaces or edges
    • high-quality metal design with scale on both sides

    The post Universal Angle & Try Square 300mm appeared first on Wolfcraft South Africa.

    ]]>

    Product description

    The steel universal measuring aid and marking template brings a wide range of functions together in a single tool. The universal angle & try square lets you determine and transfer distances and angular measurements with ease. Being guided by the sturdy limit stop and hole line means you can effortlessly draw parallel lines with a pencil. You can quickly dismantle the limit stop on the angle rail so you can mark or measure surfaces precisely. For transferring curves and circles to workpieces, you simply use the universal angle as a compass. The two fixed radii on the angle measuring scale allow you to quickly transfer curves, e.g. for rounded corners on boards. The angle acts as a stable leading edge when using a jigsaw. It will quickly become indispensable when laying laminate or making furniture. Whether you need an integrated 45° limit stop, 32-hole line or drilling template for concealed hinges, with the universal angle & try square, you’ll be well-equipped to take on any project.

    Properties
    flat square, angle measuring scale, parallel marker, marking stencil and drill guide for concealed hinges in one device – saves money and space
    removable plastic limit stop for precise working on surfaces or edges
    scale on both sides for easy reading in every position
    sturdy and durable thanks to high-quality metal design

    Technical data
    back square 90 °
    material steel
    Scaling millimetre (mm)
    further product specification 32 mm grid for furniture-making

    The post Universal Angle & Try Square 300mm appeared first on Wolfcraft South Africa.

    ]]>     https://wolfcraftsa.co.za/product/universal-angle-try-square-300mm/feed/ 0 757     3D Mitre Angle https://wolfcraftsa.co.za/product/wolfcraft-3d-mitre-angle/?utm_source=rss&utm_medium=rss&utm_campaign=wolfcraft-3d-mitre-angle https://wolfcraftsa.co.za/product/wolfcraft-3d-mitre-angle/#respond Tue, 20 Oct 2020 07:16:19 +0000 http://wolfcraftsa.co.za/product/wolfcraft-3d-mitre-angle/

    The post 3D Mitre Angle appeared first on Wolfcraft South Africa.

    ]]>     Wolfcraft 3D Mitre Angle.

    To measure and transfer masses on three-dimensional workpieces

    The 3D-mitre angle consists of high-quality plastic and is with its centimeters and angle scale is very versatile. With this you can easily remove ground and on bar, scriber pipes and three-dimensional work pieces. Marks will guide you through the rectangular geometry exactly across the corner – ideal for precise transfer of mitre angles on two sides of a workpiece. With the attacks of 45° and 90° angles and the scale for free-angle between 0 -90° you are equipped for all cases. When mark parallel lines used the 3-D-mitre angle reliable as Gauge marker. It is also equipped with a drill teaching the diameter of a drill to quickly determine.

    Features:
    • Stops for 45° and 90° angle, additional angle scale from 0 – 90°
    • Simple measuring scale
    • Can be used as a gauge marker for parallel lines
    • Integrated drill gauge for the determination of the drill bit diameter

    The post 3D Mitre Angle appeared first on Wolfcraft South Africa.

    ]]>     https://wolfcraftsa.co.za/product/wolfcraft-3d-mitre-angle/feed/ 0 379